Plasma Bevel Cutting Machine

DAMA plasma cutting bevel system is capable of cutting bevel preparation including single, double cut bevels such as the V,Y bevel.
DAMA provide Zero Offset Bevel Head. The head works by rotating the torch around the end of the cutting tip which means the angle of the cut can be changed without the need to offset the machine beam. This results in much simpler and faster control over the angle of the plasma.
No loop cut when bevel angle ≦30o
Blind bevel or variable angle bevel.
No cable twist.
Protection:
- Torch sensor break away protection.
- Breakaway-ring protection.
- Arc stop detection.

Model	Plasma bevel
Effective cutting width (mm)	2500	3100	4000	5000	6000	7000	8000	9000
Rails span (mm)	3500	4100	5000	6000	7000	8000	9000	10000
Effective cutting length	on request
CNC controller	Farley PDF TS
Plasma	HPR-130XD or HPR-260XD or HPR-400XD
Software	SigmaNest
Plasma Bevel head	DAMA Zero offset bevel head
Option	1.Oxy-Fuel cutting kit: .One Oxy-Fuel torch with motorized torch lifter and station Regulator & pressure gauge and manifold .Oxy-Fuel cutting logic sequence control & operation panel
	2.Add Motorized Oxy-Fuel torch
	3.Oxy-Fuel cutting torch height sensor (capacitive)
	4.Zinc Powder marking torch
	5.Warter spray
	6.Electrical ignition unit
	7.Rail's extension unit : Per 3000mm/unit